It is currently Fri Nov 01, 2024 9:35 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Installing rear bag vents on a 16 t22
PostPosted: Tue Jul 10, 2018 6:57 am 
Offline
Team Axis

Joined: Thu Dec 03, 2015 8:54 am
Posts: 86
Location: Higgins lake, Michigan
What size is the factory ballast hose? Looked like 1"? Noticed a few post showing a 1 way valve, has anyone tried it without it? I need to get everything coming and the boat is at our cabin thanks for any help

_________________
2016 T22 409 Black/metallic yellow


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Tue Jul 10, 2018 6:30 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
nitrous1 wrote:
What size is the factory ballast hose? Looked like 1"? Noticed a few post showing a 1 way valve, has anyone tried it without it? I need to get everything coming and the boat is at our cabin thanks for any help
If you are tapping into the drain line off the hard tank like this, yes you will want a 1 way check valve. Adding the check valve prevents the water to circulate back into the bag. It won't harm anything if you don't add it but it will take a lot longer to drain the bag and tank. Hose is 1&1/8th.ImageImage

Sent from my SM-G955U using Tapatalk

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Wed Jul 11, 2018 2:05 am 
Offline
Team Axis

Joined: Thu Oct 30, 2014 7:24 am
Posts: 88
Location: Germany
My setup is a little different but it works great as well:

I removed the vent hose from the hard tank and put it on top of the bag. Then I Y-ed into the fill hose and put one end on the hard tank (where it used to be) and one end on the other top port of the bag. Both bag drains go into the hard tank. Worked perfectly for the past 3 years in my 2014 A22.

So I only vent from the bag but I suppose that's fine since the air will always go out the top and can exit the hard tank via the two hoses that come from the bags (bag drains) and then out the bag vent.

_________________
2014 A22


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Wed Jul 11, 2018 12:10 pm 
Offline
Team Axis

Joined: Thu Dec 03, 2015 8:54 am
Posts: 86
Location: Higgins lake, Michigan
Thanks, I got everything coming...... Hopefully, I ordered it all from wakemakers and you can't seem to get anyone in customer service on the phone and they didn't answer my question online, let's just say I'm less than happy with there customer service, but they've got the best selection of parts, so I'm stuck. Thanks again for the replies

_________________
2016 T22 409 Black/metallic yellow


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Thu Jul 12, 2018 8:34 am 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Thu Jul 12, 2018 12:13 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Thu Jul 12, 2018 4:36 pm 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
steveA20 wrote:
r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk
Where is everyone buying the one way valve? Doing this to just rear bags or horseshoe front bag as well?

Thanks

Sent from my SM-G955U using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Thu Jul 12, 2018 6:29 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
r33pwrd wrote:
steveA20 wrote:
r33pwrd wrote:
Is this just to keep the bags from trapping air? Getting tired or burping the bags myself..

Sent from my SM-G955U using Tapatalk
Yes, if you do this you can just forget about the bags until they start overflowing out of the drain and 3/4 hard tank through holes.

Sent from my SM-G955U using Tapatalk
Where is everyone buying the one way valve? Doing this to just rear bags or horseshoe front bag as well?

Thanks

Sent from my SM-G955U using Tapatalk
Just the rear bags, wakemakers has everything you'll need.

Sent from my SM-G955U using Tapatalk

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Fri Jul 13, 2018 6:31 am 
Offline
Team Axis

Joined: Thu Dec 03, 2015 8:54 am
Posts: 86
Location: Higgins lake, Michigan
Maybe check bakesonline, they don't have the selection of wakemakers but they do have the stuff and they're competent, wakemakers are still jacking me around and have zero customer service. My order has said processing for 2 days and no one answers the phone or replies online. I'm giving them today to get back with me,then I'm canceling and going elsewhere if I can even do that.

_________________
2016 T22 409 Black/metallic yellow


Top
 Profile  
 
 Post subject: Re: Installing rear bag vents on a 16 t22
PostPosted: Sun Jul 15, 2018 7:55 am 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
nitrous1 wrote:
Maybe check bakesonline, they don't have the selection of wakemakers but they do have the stuff and they're competent, wakemakers are still jacking me around and have zero customer service. My order has said processing for 2 days and no one answers the phone or replies online. I'm giving them today to get back with me,then I'm canceling and going elsewhere if I can even do that.
Yea I'll just stop in there this week and see of they have them..

Sent from my SM-G955U using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: