2012 axis a22 no plug and play?

admin · **Joined:** Wed Apr 21, 2010 9:00 am **Posts:** 1115

Do you have the two U joints in the rear locker where the hoses are connected?

If you have hoses laid out under the front cushion that should mean that the front PnP was installed at the factory.

I don't think you have capped hoses laying in the rear of the boat??? 2012 is a long time ago. hard for me to remember exactly how they came in 2012.

coversjim · **Joined:** Wed Mar 11, 2015 7:33 am **Posts:** 79

ya i have the U connectors in the rear. 2 on each side. and i have the hoses up front so i think i do have PNP just doesn't have hoses laying in the rear lockers like the newer PnP does on the axis. think i was confused looking at the pNP setup of the newer axis boats.

admin · **Joined:** Wed Apr 21, 2010 9:00 am **Posts:** 1115

Coversjim....

If some 2012 guys can chime in....

Sounds to me like you have the PnP installed. you just need to buy the bags and the fitting setup. We sell the bag kits for the 2012 at boardstop with the fittings. you will just need to buy some stainless steel worm clamps from the hardware store. We sell the clamps also but they are just a better deal at the hardware store.

You need to re-route the rear hoses to the bags.

unless someone at the factory screwed up and they just put in PnP in the front I think you are set.

vanamp · **Joined:** Wed Feb 05, 2014 9:02 am **Posts:** 272

I was changing my impeller and took this picture for you. I unscrewed the cover over tank openings so you can see my pnp. '12 A22.

Attachment:

ImageUploadedByTapatalk1429839148.974933.jpg [ 428.88 KiB | Viewed 14901 times ]

dezul · **Posted:** Thu Apr 23, 2015 8:16 pm

vanamp wrote:

I was changing my impeller and took this picture for you. I unscrewed the cover over tank openings so you can see my pnp. '12 A22.

Attachment:

ImageUploadedByTapatalk1429839148.974933.jpg

you da bomb. How was the impeller changout? Mine was easier than everyone claimed it to be.

vanamp · **Joined:** Wed Feb 05, 2014 9:02 am **Posts:** 272

It took me two days and ten minutes to change......two days waiting for puller to arrive from Amazon prime and ten minutes to change. It's a little awkward but was not a difficult project.

vanamp · **Joined:** Wed Feb 05, 2014 9:02 am **Posts:** 272

Looking at that picture I realized how dirty my lockers are. I have some work to do. As soon as this cold snap is over I'll be scrubbing them out.

Robert95z · **Joined:** Tue Sep 02, 2014 1:55 pm **Posts:** 148

Hey van how much you pay for the puller? Last time i looked the one they had for prime shipping was like double the price you could get from bakes.. I still need to order one..

dezul · **Posted:** Thu Apr 23, 2015 9:38 pm

I doubt I will ever pay for a puller. It is too easy pull on your own.

vanamp · **Joined:** Wed Feb 05, 2014 9:02 am **Posts:** 272

http://www.amazon.com/Sea-Dog-660040-1- ... B002FVKBSI

I got this one. With free shipping it was only a few dollars more than bakes.

My impeller was stuck pretty good. With the puller I was able to remove it without damaging it to keep as a spare.

Axis Wakeboard Boat Forum

2012 axis a22 no plug and play?

Who is online