plug and play T22

citron971 · **Joined:** Wed Jan 22, 2014 6:05 am **Posts:** 6

hello guys
just received our new T22, was plugging the bags, pretty straight forward at the back, but in the bow I m not sure
Is there a vent ??
I have a 650 from straight line
and 2 750 at the back
what king of connection elbow, straight ?? do you need to cut something ? in the back the very aft drain line is very long if you don t reduce the length the bag is under the rear seat?
any tips ideas whatever
this is our first boat just love it
looking forward to reading your advise
ben

T22rider · **Posted:** Sat Aug 30, 2014 10:01 pm

In the front you have to remove the y fitting to split it into three hoses. One is a drain one is a vent and the other is a fill. Hope this helps.

ADDICTED2WAK · **Joined:** Tue May 06, 2014 9:48 am **Posts:** 33

If I get a pic of mine, showing what direction each tube goes, would that be helpful? Let me know if so and I'll hop in there and take one..

citron971 · **Joined:** Wed Jan 22, 2014 6:05 am **Posts:** 6

thanks
the picture can be helpful,
do you need to reduce the length of an hose, when i lay down the bag, there is a plug on the right side and the hose that is suppose to go to this one is pretty long then ?
same for the rear bags with the draining

ADDICTED2WAK · **Joined:** Tue May 06, 2014 9:48 am **Posts:** 33

Attachment:

ImageUploadedByTapatalk1409594003.234752.jpg [ 116.49 KiB | Viewed 19364 times ]

Attachment:

ImageUploadedByTapatalk1409593993.619993.jpg [ 232.05 KiB | Viewed 19364 times ]

Not sure if this actually helps or not. Hopefully.

Axis Wakeboard Boat Forum

plug and play T22

Who is online