It is currently Fri Jan 10, 2025 6:39 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 2079, 2315 or???
PostPosted: Mon May 19, 2014 7:37 am 
Offline
Team Axis

Joined: Mon Jul 15, 2013 5:55 pm
Posts: 127
I'm looking to upgrade my prop soon and am deciding between these props. We're going to be running 3000-3500 lbs in ballast + wedge and 3-6 people. We boat in northern Oklahoma so elevation is only 1000'. I have the standard 330 hp in my A22. We wakeboard 90%, may surf 10% and never running across the lake wide open so not concerned with that. We normally only run 20-30 depending on the water to get where we board. What would you guys go with?


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Mon May 19, 2014 8:13 am 
Offline
Team Axis
User avatar

Joined: Mon Sep 23, 2013 4:01 pm
Posts: 1386
Location: Knoxville
I went with the 2315. You won't be disappointed with it.


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Mon May 19, 2014 8:35 am 
Offline
Team Axis

Joined: Mon Jul 15, 2013 5:55 pm
Posts: 127
The 15" props clear the hull and trailer no problem?


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Mon May 19, 2014 8:36 am 
Offline
Team Axis

Joined: Thu Dec 15, 2011 7:57 am
Posts: 779
Location: East Texas
Yes 15 ' s will clear both.

_________________
2010&2014 A22
2012&2015 MB
2016 Supra SA400


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Mon May 19, 2014 12:04 pm 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
2315 all day for the A22.

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Mon May 19, 2014 6:21 pm 
Offline
Boater

Joined: Sun May 11, 2014 9:41 am
Posts: 34
agree with 2315

I demoed T22's one with the 5 blade and the other with high torque 2315 I think? not sure about the size but the 4 blade to me outperformed the cinco at slower speeds imho.

For surfing the 4 blade prop seem to pull better(easier) not much difference on top end speed but kept the rpm to 4500 because new boats, not sure how they would perform at higher rpms. wake boarding did notice any real difference however took out some ballast for wake boarding :geek:


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Wed May 21, 2014 9:55 am 
Offline
Site Admin
User avatar

Joined: Wed Apr 21, 2010 9:00 am
Posts: 1115
I see 2315 props all day long go out at boardstop for Malibu/Axis boats. I have run a 2315 on my boats for the past few years. No complaints. We tested a few Acme 5 blades and still went back to the 2315. Never tried an OJ but you cannot go wrong with a 2315 on the A22.


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Wed May 21, 2014 11:17 am 
Offline
Team Axis

Joined: Thu Dec 05, 2013 2:22 pm
Posts: 437
The 2315 works on the a20 right?


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Wed May 21, 2014 12:00 pm 
Offline
Site Admin
User avatar

Joined: Wed Apr 21, 2010 9:00 am
Posts: 1115
On the A20 some are saying the 2079. but I have seen a number of A20 guys get the 2315. I would see if any A20 guys have had the 2079 and 2315 on the same boat, same weight setup and see if they saw much of a difference on the A20.


Top
 Profile  
 
 Post subject: Re: 2079, 2315 or???
PostPosted: Wed May 21, 2014 12:11 pm 
Offline
Team Axis

Joined: Thu Dec 05, 2013 2:22 pm
Posts: 437
2079 is a 14.5" prop. Is that to imply that a 15" prop doesn't have clearance on the a20?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: Google [Bot] and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: