It is currently Wed Dec 25, 2024 2:00 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Tue Apr 23, 2013 1:25 pm 
Offline
Team Axis
User avatar

Joined: Fri May 18, 2012 7:05 pm
Posts: 358
Walter wrote:
they also had the exact same ones that came in the boat but were currently out of the red ones, they have a few different colors in house, blue, green, red, white, pink, and some color changing ones too.



Walter,
Did you change out the factory lights or leave them white?
Looks like in your pics you still have some white ones...?
If you did change out did you use the tape over the light like mentioned in another thread or did you change out with replacements from Auto Zone?

About to do this project.
Thanks

_________________
Bama Axis

2012 Axis A22


Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Tue Apr 23, 2013 2:15 pm 
Offline
Team Axis
User avatar

Joined: Tue Jun 08, 2010 7:22 pm
Posts: 1321
Location: BoomTown!
All of the small round LEDs are the factory ones, under the seats were red and In the glove box and ski lockers and by the speakers they were white


Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Fri May 10, 2013 7:20 pm 
Offline
Team Axis
User avatar

Joined: Fri May 18, 2012 7:05 pm
Posts: 358
Walter wrote:
picked these up at Advance auto, have all different lengths, and they have double sided tape already installed and they can be cut to length, I used the 36" strips on each side, they were about 35$ a piece, the individual led's are 10$ for a pack of four and they fit perfect in the drain holes for the cup holders


The cup holder lights can be found at Advance Auto Parts per Walters post.
However, the red ones have been discontinued. They still carry the white and blue for now. If you want the red ones you can call and have them look for part number 78212, If they don't have them they should be able to locate stores around the area that may have some left. FYI, if they happen to have any in stock, tell them to look on the discontinued rack to find them. Original price around $10. now on clearance for about $2.65.
If you happen to call and they come up with some weird part for that number like a gear or fan belt you have to tell them to "Hit F5" and look at "price look up" them type in the number. I know this after talking to about 15 stores, some of which could find it and some that had no idea what I was talking about. If you are interested in doing this you may want to call. I couldn't even find them listed on the manufactures website.
I finally found enough.

_________________
Bama Axis

2012 Axis A22


Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Fri May 10, 2013 10:23 pm 
Offline
Team Axis
User avatar

Joined: Wed May 02, 2012 4:25 am
Posts: 84
Location: Adelaide Australia
These all look brilliant guys, some great ideas to look into, I have just started doing my own, so many on here to aspire to :D

_________________
2012 Axis A20 Down Under


Last edited by paula.shane on Sat May 11, 2013 2:48 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Fri May 10, 2013 10:26 pm 
Offline
Team Axis
User avatar

Joined: Wed May 02, 2012 4:25 am
Posts: 84
Location: Adelaide Australia
Just started some LED's


Attachments:
File comment: Under dash
image.jpg
image.jpg [ 87.1 KiB | Viewed 22789 times ]

_________________
2012 Axis A20 Down Under
Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Fri May 10, 2013 10:28 pm 
Offline
Team Axis
User avatar

Joined: Wed May 02, 2012 4:25 am
Posts: 84
Location: Adelaide Australia
I have since changed these bulb type LED's under the seats for strip LED's, and they are so much better now, next step hopefully some behind the speaker grills!


Attachments:
File comment: 1st go at the lights
image.jpg
image.jpg [ 94.98 KiB | Viewed 22789 times ]

_________________
2012 Axis A20 Down Under
Top
 Profile  
 
 Post subject: Re: DIY LEDs in your boat.
PostPosted: Sat Jun 29, 2013 11:49 am 
Offline
Team Axis
User avatar

Joined: Fri May 18, 2012 7:05 pm
Posts: 358
LED's installed under seats and single lights in cup holders. Thanks for the tips Walter.

_________________
Bama Axis

2012 Axis A22


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: