It is currently Wed Dec 25, 2024 11:58 am

All times are UTC - 6 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 1:16 pm 
Offline
Boater

Joined: Wed Sep 07, 2016 1:47 pm
Posts: 49
So I’m going to be taking off my factory wet sounds Icon 8’s (4 of them will be for sale soon) and installing 4- rev10’s

For amp i was either going to run 1- Wetsounds SD2 or 2 Precision Power PPI900.4’s

I posted the specs below. it looks like i could get 310w per speaker with the SD2 vs 480w with the PPI.

Have any of you done this or any advice? Ive personally used the PPI to power the NVS deviant tower speakers I had on my old boat and it worked great and I’ve read a lot of people run this with wet sounds rev 10

thanks

Cost:
SD2- $1000
PPI900.4- 165 each= 330$ total

SD2
Output Power (RMS) @ 1% 1000Hz 14.4V CEA 2006
Stereo @ 4 Ohms 2 x 400 Watts @ 58A
Stereo @ 2 Ohms 2 x 620 Watts @ 107A
Mono @ 4 Ohms 1 x 1250 Watts @ 108A
Frequency Response 3dB - 8 Hz - 50 kHz
Crossover Range High and Low Pass 30Hz - 300Hz 12dB/Octave
Bass Boost 0-12.5dB @ 27Hz - 110Hz
S/N Ratio (A wtg) >83dB >110dB
Input Sensitivity Low Level 0.2V - 4.1V
Remote Level Range 0 db to -61 db
15.6V Overvolt Protection

PPI
General Features:
Phantom Series Class D Full Range 4-Channel Car Amplifier
RMS Power Rating (14.4V):
4 ohms: 145 watts x 4 chan.
2 ohms: 225 watts x 4 chan.
Bridged, 4 ohms: 450 watts x 2 chan.
RMS Power Rating (12V):
4 ohms: 100 watts x 4 chan.
2 ohms: 150 watts x 4 chan.
Bridged, 4 ohms: 300 watts x 2 chan.
Sonic Electronix Certified Power Rating*:
4 ohms: 149 watts x 4 chan.
2 ohms: 255 watts x 4 chan.
Bridged, 4 ohms: 480 watts x 2 chan.


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 1:54 pm 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
Alexander on here had an SD2 on 4 Wet Sound towers and it was rediculous loud if he turned up which he rarely did. I couldn't imagine what 480w per speaker would be like.

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 3:38 pm 
Offline
Team Axis
User avatar

Joined: Mon Oct 12, 2015 8:10 pm
Posts: 480
Location: San Tan Valley, Arizona
Another amp to think about is the ARC 600.2. I am running this amp to a pair of Rev10s so each speaker is getting 400 watts @ 4ohm. It will power 4 Rev10s @ 300 watts @ 2 ohms. I think that amp can be had for high $600 low $700 range. I know that my 1 pair pair of 10s is LOUD with 400 watts, i couldn't imagine needing another pair unless you wanted to be the loudest boat on the lake. I only wakeboard and the music is loud and clear at any rope length.

_________________
2003 Sanger V210....SOLD
2005 MC X2....SOLD
2006 MC XSTAR....SOLD
2016 AXIS A20....SOLD
2018 AXIS T22....CURRENT


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 3:53 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
I have a 900.4 on my one pair of Rev10's and it's loud.

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 7:32 pm 
Offline
Boater

Joined: Wed Sep 07, 2016 1:47 pm
Posts: 49
Thanks, I hate to run 2 separate amps for the tower speakers but I hate spending 1k for a amp more! Does anyone else have any amps that are good and will power 4 rev 10s


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun Apr 30, 2017 8:38 pm 
Offline
Team Axis

Joined: Sat Jun 06, 2015 10:35 pm
Posts: 1181
Location: Sammamish WA
bjw444 wrote:
Thanks, I hate to run 2 separate amps for the tower speakers but I hate spending 1k for a amp more! Does anyone else have any amps that are good and will power 4 rev 10s

My friend has the sd2 and 4 rev10s on his xstar and trust me you will not be disappointed.

Sent from my SM-G955U using Tapatalk

_________________
-2015 A24 - 409 HP - 2249 Prop - 1100 rear sacs - 950 front sac - 290lb rider with Red Rocket and Phase 5 Quest


Top
 Profile  
 
 Post subject: Re: Amp For 4 wet sounds rev10’s?
PostPosted: Sun May 07, 2017 8:04 am 
Offline
Team Axis

Joined: Sun Sep 16, 2012 8:55 am
Posts: 375
Location: Central Texas
I used the SD2 on my 4 Rev 10s too... no way you can go wrong with that choice.

_________________
-aha-


18 Monterey 278SSC


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: