Ebay 4" seat lift/riser works and it's AWESOME!!!

r33pwrd · **Posted:** Wed Sep 09, 2015 9:31 pm

I'm in

Boostedsled · **Posted:** Wed Sep 09, 2015 11:07 pm

Thanks Jason for the test fit. Any chance you have dimensions from yours?

Can you answer the logo question or the question about the lock box as to how it closes and latches/locks?

I will update everyone as I receive info.

jason427 · **Joined:** Sat May 16, 2015 12:21 pm **Posts:** 37

Hardware on the box is very cool, it has two little spring loaded parts (stainless) that retract to friction fit close. I don't know that I will ever use it for anything but kind of a cool feature to have it. As far as dimensions I don't know, but everything lined up and fit perfectly.
All edges and holes finished of nicely.
Jason

JohnnyBravo · **Posted:** Sun Sep 13, 2015 1:49 pm

Im in on group buy.

dezul · **Posted:** Sun Sep 13, 2015 7:37 pm

I am in also.

GODUCKS! · **Posted:** Mon Sep 14, 2015 6:00 am

Im in!

AJWest · **Posted:** Tue Sep 15, 2015 11:00 am

So...with this riser, if you are 6'00" tall and driving the boat cruising only, are you looking over the windshield?

WhoaNellie · **Posted:** Tue Sep 15, 2015 2:50 pm

It appears that he makes two types of risers. One for 2011+ Malibu's that have a large raised fiberglass seat base and one for earlier boats that have a vinyl/plastic covered seat base directly on the floor. I think my 2012 A20 needs the older version since I don't have a large fiberglass base.

http://www.ebay.com/itm/Malibu-boat-driver-seat-lift-riser-4-inch-higher-than-original-CNC-machined-/171876266849?hash=item28049fb361

Walter · **Posted:** Tue Sep 15, 2015 7:33 pm

WhoaNellie wrote:

It appears that he makes two types of risers. One for 2011+ Malibu's that have a large raised fiberglass seat base and one for earlier boats that have a vinyl/plastic covered seat base directly on the floor. I think my 2012 A20 needs the older version since I don't have a large fiberglass base.

http://www.ebay.com/itm/Malibu-boat-driver-seat-lift-riser-4-inch-higher-than-original-CNC-machined-/171876266849?hash=item28049fb361

Mine is a 2010 and I think I need the early style too, can he engrave the smaller riser also?

Attachment:

ImageUploadedByTapatalk1442367229.561593.jpg [ 306.87 KiB | Viewed 19069 times ]

WhoaNellie · **Posted:** Thu Sep 17, 2015 5:04 pm

Walter wrote:

WhoaNellie wrote:

It appears that he makes two types of risers. One for 2011+ Malibu's that have a large raised fiberglass seat base and one for earlier boats that have a vinyl/plastic covered seat base directly on the floor. I think my 2012 A20 needs the older version since I don't have a large fiberglass base.

http://www.ebay.com/itm/Malibu-boat-driver-seat-lift-riser-4-inch-higher-than-original-CNC-machined-/171876266849?hash=item28049fb361

Mine is a 2010 and I think I need the early style too, can he engrave the smaller riser also?

Attachment:

ImageUploadedByTapatalk1442367229.561593.jpg

I emailed Jared and he said that he can do the Axis logo on the early style, but would like to have 20 orders before doing so. Looks like another group buy is needed to make it happen.

Axis Wakeboard Boat Forum

Ebay 4" seat lift/riser works and it's AWESOME!!!

Who is online