Axis Wakeboard Boat Forum

Finally started on my stereo install last weekend. I had to cut in bow speakers, and it is a lot easier than it looks. I re wired the tower with 12 gauge, which was a PITA, and also ran 12 gauge for all the in boat speakers, and 22/2 for the LED's. The wetsounds screw holes dont line up very well with the Alpines for some reason, so I need to predrill a few holes and screw them all down better, but ran out of time last weekend. Im ready to start building the amp rack. I know that the its 16" tall towards the bow, and slopes to 20" tall towards the stern, and the max length of the amp rack can be 40" long. Im an hour away from the boat and wont be back to it til next weekend, but Im wanting to start building the amp rack this week. Anyone have pics of their amp rack compartment? Im thinking the top corners should be squared, and the bottom have the goofy angle? Any help on that would be awesome. Heres some shitty cell phone pics I got the other night. The amp rack should be pretty awesome once I get started

Don't you be stealing all my ideas.

I swear I have seen some pics on this site somewhere. If you can't find them, let me know. I can snap some pics of mine pretty quickly. I will have to pull the cover off of it though and I am being lazy right now.

Here is one I found. There is at least one other in the DIY section.

viewtopic.php?f=16&t=1815

Here is another
viewtopic.php?f=16&t=1333

Thanks guys. I've got pretty much the same measurement as the 1 st link. I was just curious if the bottom needed squared or too. It looks like both top corners are squared and the bottom tapers.

Here is another one Bryce. viewtopic.php?f=16&t=1954

I pulled my amp rack so I can give you exact dimensions if you want.

That'd be awesome Dezul! Do you have pics of it? Im more interested in if the top corners are squared and the bottom is tapered, Or if I need to taper both the top and bottom by maintaining a centerline of the amp rack, if that makes since....