It is currently Mon Dec 30, 2024 2:36 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: 2016 G23
PostPosted: Sat Dec 24, 2016 7:10 pm 
Offline
Team Axis
User avatar

Joined: Wed Nov 30, 2011 8:08 pm
Posts: 770
Location: West Tennessee
Image
So I was scrolling around boat trader and found this. 2016 G23 less than 10 hours he says. It is a hold over and can be had for 105k seams too good to be true. Thoughts?


Sent from my iPhone using Tapatalk

_________________
Gibbs
Malibu 23 LSV


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sat Dec 24, 2016 8:04 pm 
Offline
Team Axis

Joined: Fri Aug 17, 2012 1:18 pm
Posts: 435
Location: OKC
Nah. It's doable. Most likely has standard features and smaller motor.

My buddy got a 2013 with just a couple hundred hours last spring for low $70s (i.e. $72k). He got a steal on it and sold it late season and made money. Deals can be had, especially this time of year.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sat Dec 24, 2016 9:29 pm 
Offline
Team Axis
User avatar

Joined: Wed Nov 30, 2011 8:08 pm
Posts: 770
Location: West Tennessee
I'm looking at new LSV's now for around that price. I don't really look at G's a lot but didn't expect to buy new one anywhere close to that.


Sent from my iPhone using Tapatalk

_________________
Gibbs
Malibu 23 LSV


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sat Dec 24, 2016 9:42 pm 
Offline
Team Axis
User avatar

Joined: Wed Sep 03, 2014 5:19 am
Posts: 457
Location: Mt. Washington, KY
Depending on options I would be calling about that

Sent from my SM-G900V using Tapatalk

_________________
2014 A24


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sat Dec 24, 2016 9:51 pm 
Offline
Team Axis
User avatar

Joined: Wed Nov 30, 2011 8:08 pm
Posts: 770
Location: West Tennessee
I'll find out Tuesday. The guy is supposed to call me back.


Sent from my iPhone using Tapatalk

_________________
Gibbs
Malibu 23 LSV


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sat Dec 24, 2016 10:54 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
I like the colors.

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sun Dec 25, 2016 2:33 pm 
Offline
Team Axis

Joined: Wed Feb 05, 2014 9:02 am
Posts: 272
When my dealer sent me some prices on "closeout" 2016 axis boats. I started looking at used G's. I feel like there is a bubble in the Axis pricing right now.

Sent from my SM-G930V using Tapatalk


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sun Dec 25, 2016 2:48 pm 
Offline
Team Axis

Joined: Thu Jan 08, 2015 6:29 pm
Posts: 538
Location: Ohio
vanamp wrote:
When my dealer sent me some prices on "closeout" 2016 axis boats. I started looking at used G's. I feel like there is a bubble in the Axis pricing right now.

Sent from my SM-G930V using Tapatalk


+1, that's why I ordered something different for '17.

_________________
2015 T22 - SOLD


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Sun Dec 25, 2016 3:34 pm 
Offline
Team Axis
User avatar

Joined: Wed Nov 30, 2011 8:08 pm
Posts: 770
Location: West Tennessee
I'm going with Malibu again next time. I was told to wait another year for a new LSV something new is brewing for 2018.


Sent from my iPhone using Tapatalk

_________________
Gibbs
Malibu 23 LSV


Top
 Profile  
 
 Post subject: Re: 2016 G23
PostPosted: Fri Dec 30, 2016 11:09 am 
Offline
Team Axis

Joined: Tue May 24, 2016 7:44 am
Posts: 149
gibbs114 wrote:
Image
So I was scrolling around boat trader and found this. 2016 G23 less than 10 hours he says. It is a hold over and can be had for 105k seams too good to be true. Thoughts?


Sent from my iPhone using Tapatalk

Spent this past year on a 2013 with 409 and not a 2:1 trans

MORE FUN THAN A BARREL of MONKEYS, if your old enough.

With 2:1 it doesn't matter the options, beat him up over that boat to beat him up and win to pay for your plug n play, or NOT, cause ya don't need it!!!!

A sick surf with just a driver toes and heals both sides with no flaws any where in the wave on either side, if empty of people and full factory, the only adjustments necessary for this or the wind in your face is to put your front foot further forward, done , rippin again. Load with people and your surfing a tsunami!!!!.

Buy it cheap if you can afford it and you'll never come back from the dark side. Set it on 3 ramp regular and 0 ramp on goofy. 2016 also has hull improvements slightly in stern near NSS to improve both wave and wake.

Oh, let's not forget those insanely easy transfers that I assume nautique has improved the times like Malibu on the rams and it's even more insane. Full wave formation in 3.5 seconds from Hitting the button, full push in under 4 seconds. You can use a slight counter steer to make sure it's those times and I'm sure whatever they have now is faster.
I make the occasional transfer on my 3.5 second just to flip the paddle rams then on with counter steer formation in another 3+ seconds. I've made 30 in a row 15 both ways on that older G and taught its owner a wskeboarder who was a decent surfer to do transfers in 15 minutes and he was barely adequate on heelside surfing

If you have to put tower down with their Bimini, that's stupid easy as well, the guy yanks his down pulling and holding the partially booted Bimini standing in the bow. It's down in a bout two seconds

Repairs, none other than wear and tear on interior. This year he put on an alternator after 1230(you read right) hours, stock sacs leaked maybe extensively cause bilges always ran but computer and bilges takes care of that so he never bothered to fix

_________________
14 A20, 850 rears with kinetic vents, front 950, stock plus wedge and 700 lead
P5 53” Ahi, Brigade 4’10” goofy asym, LF Happy pill 4’8”, LF Catalyst Nomad skate, HL wakeboard with old Murry boots


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: Google [Bot] and 57 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: